This model was designed and constructed with heavy involvement from the offshore windmill industry. The main purpose of this giant bag is to fit an entire EU-pallet inside and hereby lowering the amount of lifts needed. The bag is able to carry content weighing up to 1 ton.
- *NOTE: The bag is NOT sold with a pallet as shown in the picture above.
- It is possible to attach a pallet underneath the bag for easier movement on the ground. This is done by guiding polyamide ribbons underneath the bag and pallet and through stainless steel buckles.
- The bag is made from a heavy tarpaulin material making it strong and water repellent.
- 4467 uses 4 lifting straps which are made of high quality polyester webbing.
- Stainless steel buckles are used to tighten and strengthen the walls of the bag.
- The lid is closed by velcro and 50mm plastic buckles around the sides of the bag.
- The front of the bag can be opened, folded and used as a ”gate” making it easier to fill the bag and making it possible to place an entire pallet inside using a fork lift.
- A plastic tube is placed inside the top of the ”gate” for rolling the fabric.
- The front opens by zippers on each side.
- A removable velcro patch for easy logo printing is placed on the front of the bag.
- A transparent plastic pocket for A4-documentation or markings is placed in each end of the bag. The pockets are attached by velcro and can be easily removed.
- The bottom cover is made of PEHD plastic to prolong the life span of the bag and offer weight distribution.
- Hard plastic plates are placed inside the walls of the bag.
- A 20 mm PVC plate is placed inside the bag to offer protection and weight distribution.
- The walls can be taken out and placed in the bottom of the bag to lessen the space consumption of the bag when transporting or storing it.
- The bottom cover is detachable and can be replaced, if needed.
Specifications
Working Load Limit |
1000 kgs |
Volume |
1100 L |
Weight |
50 Kgs |
Special Feature |
Water repellent |
Open |
130 x 90 x 100 cm (LxWxH)
|
Closed |
130 x 90 x 100 cm (LxWxH)
|
Lifting Height |
|
Main Material |
|
Bottom Cover |
Acrylonitrile Butadiene Styrene (ABS) Plastic
|
Slings / Ribbon |
|
Buckles |
|
Standards |
ISO 21898, EN 1492-1 |