| Inner Diameter |
45 mm |
| Outer Diameter |
55 mm |
For high loads, impact stress, oscillating movements, wear-resistant, dirt-resistant, corrosion-resistant, long service life.
LUB-MET is a maintenance-free plain bearing. However, initial lubrication is necessary. For high loads, shock loads, wear-resistant, insensitive to dirt, corrosion-resistant, long service life.
Materials:
| Support material/Carrier material |
CuZn25Al5 |
Product Features:
| Lubricant |
solid lubricants |
| Maintenance |
maintenance free |
| Static load |
≤ 150 N/mm² |
| Dynamic load |
≤ 100 N/mm² |
| Sliding speed |
≤ 1,0 m/s |
| Friction value |
0,03 up to 0,20 µ |
| Temperature strain |
-100 up to +300 °C |
| max. pv-value |
2,8 N/mm² x m/s |
| Hardness |
190 - 220 HB |
Tolerance Specifications:
| Housing ø |
H7 |
| Bushing inner ø after mounting |
E7 / s6 (ab 120 ø r6) |
| Shaft tolerance |
f7 |
Shaft Material:
| Material |
The difference in hardness to the bearing should be at least 100 HB if possible hardened and ground, roughness ≤ Rz 6,3 |
Assembly Instructions:
| Housing |
Installation chamfer, approx. 1.5 mm x 15 to 45° |
| Shaft |
Installation chamfer, 5 mm x 15°, edges rounded. |
| Installation mandrel |
It is advisable to use a suitable installation mandrel. It may be necessary to grease the outer surfaces during installation. |
